Description
High-Strength Metal Repair Paste
Our premium two-component epoxy repair paste is tailored to restore and strengthen worn, damaged, or corroded metal surfaces. The solvent-free formula combines a dark grey base with a light grey activator to create a tough, mid-grey paste that adheres securely to metal. Perfect for industrial, marine, and heavy-duty repairs, it delivers long-lasting durability in the most demanding environments.
Applications
This versatile repair paste adheres to a variety of metal surfaces, making it perfect for:
✔ Worn or damaged pump shafts
✔ Cracked engine blocks and valve casings
✔ Corroded hulls and rudder surfaces
✔ Leaking tank seams
✔ Damaged flanges and hydraulic rams
✔ Cold bonding of steel plates
Why Choose Our Epoxy Repair Paste?
- Thick Application Without Sagging – Build up to 25mm in a single layer, perfect for deep repairs.
- Precision Machinability – Once cured, it can be drilled, tapped, sanded, and shaped for a flawless finish.
- High Heat Resistance – Withstands temperatures up to 200°C (dry) and 60°C (immersed) for reliable performance.
- Extreme Strength & Durability – Offers superior structural integrity, resisting impact, pressure, and stress.
- Corrosion & Wear Protection – Shields against abrasion, rust, and harsh environments for long-term reliability.
- Industry-Approved & Certified – Bureau Veritas marine approval and USDA compliance for incidental food contact.
How to Apply
For the best results, follow these simple steps:
- Surface Preparation – Clean and degrease the area using MEK or a similar solvent. Abrade to ISO 8501/4 ST3 or blast to SA2.5.
- Mixing – Combine the base and activator at a 5:1 ratio by weight (or 3:1 by volume) until fully blended into a uniform grey colour.
- Application – Apply using a spatula or applicator tool, pressing firmly into cracks and imperfections. Smooth out as needed.
- Curing – Allow at least 6 hours at 20°C before machining or applying load.
Important Notes & Precautions
⚠ Not suitable for non-metallic surfaces.
⚠ Ensure surfaces are clean and free from grease, rust, or oxidation before application.
⚠ Wear protective gloves and eye protection during use.
⚠ Do not apply in temperatures below 5°C.
Recommended Products
For enhanced adhesion and longevity, we recommend using this repair paste in combination with Resimac primers and degreasers.
Health & Safety Information
- UN No.: 1759
- Hazard Class: 8
- Contains bisphenol A and diethylenetriamine – may cause skin irritation, serious eye damage, and allergic reactions.
- For professional use only.
Resimac Official Website
Approvals
Systems Guide
Plate Bonding Brochure
Data Sheet (Product)
Data Sheet (Base Component)
Data Sheet (Activator)
